Photos make almost any espresso machine look smaller than a kitchen counter really is. If you are checking Meraki espresso machine dimensions before you buy, you need the published footprint, a little extra room around it, and a clear sense of the 58 mm portafilter standard — not just a lifestyle image.
This page uses official measurements from Meraki’s live US product page, FAQ, and current Product Manual, all checked on 11 November 2026. Where those sources disagree by a few millimeters or grams, the difference is stated instead of being rounded away. Cup clearance under the spout is not published as a single official number; that gap is called out as unconfirmed.
Official product-page dimension graphic — compare it with the written specification table on the same page before you cut a counter template.
Measure the counter before you fall for a photo
Measure the counter, cabinet underside, and outlet path before you trust a photo. Meraki’s published body is about a 370 mm (14.6 in) square footprint, but a usable station also needs room for a pitcher, a cloth or knock box, the steam wand’s swing, and a hand at the hopper.
Phone photos compress depth. A machine that looks tidy on a marble island can sit tighter once the water tank, drip tray, and a 58 mm portafilter handle are in daily use. If you have a low shelf or an under-cabinet lighting rail, measure that gap with the cabinet door or lighting in its usual position, not with the door temporarily swung away.
Write the numbers down before you shop. A paper template of the footprint, taped in place for a day, is more honest than a second look at a product video.
Footprint, height, and clearance numbers to copy from the product page
Meraki espresso machine dimensions on the US product page, checked 11 November 2026, are 370 × 370 × 415 mm and 14.5 kg. The current Product Manual lists the same footprint and 14.3 kg. An official image caption describes height as 412 mm. Copy those figures, then leave working margin around them.
That is a small but real disagreement on height (415 mm vs 412 mm) and weight (14.5 kg vs 14.3 kg). Use the live product page and the manual that ships with the machine as the sources of truth, and plan clearance as if the larger published height is the one you have to live with.
The official FAQ also publishes shipping-carton size: 500 mm × 500 mm × 470 mm, at 20 kg. That is the box you have to get through a doorway and onto a table, not the machine footprint. If two people will lift it onto the counter, plan for the packed weight first and the 14-plus kg body after unpacking.
Converted for a US kitchen tape: 370 mm is about 14.6 in, 415 mm is about 16.3 in, and 412 mm is about 16.2 in. The carton is about 19.7 × 19.7 × 18.5 in. Leave extra room beyond the body for ventilation, the power cord, and a pitcher under the steam wand.
Cup clearance, scale stacks, and tall glasses
Cup clearance is the measurement most photos hide and official tables often skip. Meraki’s product page describes a yield scale on the drip tray and a dose scale under the grinder, but it does not publish a single official “cup height under the spout” figure. That number is unconfirmed here.
What you can still do is test the stack you actually use. If you add a scale, a glass, or a pitcher under a spout, the available height shrinks. Double-wall espresso cups behave differently from a tall latte glass. If you routinely drink in a 12 oz tumbler, do not assume a product beauty shot taken with a demitasse will translate.
Until Meraki publishes a cup-clearance spec, treat tall-glass fit as something to confirm during the 30-day home trial, or ask support before you buy if oversized cups are a hard requirement.
Portafilter size: what 58 mm changes for accessories
Portafilter size is part of the dimension question even though it is not a countertop measurement. The official product page lists a 58 mm E61 portafilter. That standard decides which baskets, screens, and tools will fit without adapters.
If you already own 54 mm or 51 mm accessories from another home machine, they will not simply drop in. Meraki’s 58 mm espresso machine page is the fit hub for that standard. After-purchase tools such as a bottomless portafilter or a 58 mm portafilter basket should be checked against that 58 mm specification, not against a photo of a handle.
The in-box set described on the product page includes a 58 mm portafilter and related tools; confirm the current “what’s in the box” graphic when you buy. A wider 58 mm workflow also means you should leave room to lock the handle in and out without hitting a backsplash or a wall.
Steam, heat, and cabinet-overhang clearance
Steam and heat need air, even when the body fits the tape measure. Official pages do not publish a required cabinet-overhang clearance or a minimum side gap. That gap is unconfirmed as a factory number, so you have to leave practical room anyway.
Give the steam wand space to tilt into a pitcher without hitting a wall or a coffee canister. Leave room above the hopper so you can lift the lid and pour beans without scraping a cabinet. The machine also exhausts heat from brewing and steaming; tucking it into a tightly boxed alcove with no side gap is a poor plan even if the 370 × 370 mm base technically slides in.
If your only open counter sits under a shelf at about 16 in, the published height leaves very little extra. Measure twice, and include the hopper lid in the motion, not just the resting silhouette.
A measurement worksheet you can use in the kitchen
Use this as a copy-down sheet, then compare it with the live product page before you order.
| What to measure | Official figure to copy (checked 11 November 2026) | Your kitchen |
|---|---|---|
| Machine footprint (W × D) | 370 × 370 mm (about 14.6 × 14.6 in) on the product page and manual | ____ |
| Machine height | 415 mm on the written spec table; 412 mm on the dimension-image caption | ____ plus hopper-lid motion |
| Machine weight | 14.5 kg on the product page; 14.3 kg in the MEM03 manual | Can two people lift it onto the counter? |
| Shipping carton | 500 × 500 × 470 mm, 20 kg (FAQ) | Doorways, stairs, landing table |
| Portafilter standard | 58 mm E61 | Do existing tools match? |
| Cup clearance under the spout | Not published — unconfirmed | Test your tallest usual glass |
| Cabinet / steam / wand swing | Not published — leave practical gaps | ____ |
The empty cells are the point of the page. Fill them with a tape measure, not with a guess from a photo.
What photos hide: cords, drip tray, and hopper height
Product photography is framed to show the face of the machine. It often hides the cord route, the drip tray’s pull-out travel, and the extra height you need to remove or fill the hopper.
The official FAQ lists a 2000 ml water tank and a drip tray; the current manual lists drip-tray capacity as 650 ml. Both parts have to come out for daily use. If the machine is pushed flush to a wall, the tray may not have a straight path. The power cord needs a reachable outlet — the official US FAQ says the machine is not dual-voltage and is configured for the destination, with 110–120 V / 60 Hz as the US and Canada default, so an extension-cord workaround is not a design feature.
Hopper height is included in the published overall height only as part of the body measurement. Opening the hopper is a different motion. If your cabinets are tight, mock that motion with a cardboard sleeve at 16.3 in before the carton arrives.
In-box 58 mm tools take space too — confirm the current kit on the product page and leave room to use the portafilter handle.
When a compact rival still needs the same gap
A physically shorter machine does not automatically solve a tight counter. You still need pitcher space, a place to knock out a puck, and a way to lift a hopper or refill a tank. A compact rival that needs a separate grinder can occupy more total width than one all-in-one body, even if each chassis looks smaller in a photo.
Meraki’s published 370 × 370 mm base is compact for a dual-boiler machine with a built-in grinder and two scales, but it is not a slim appliance. If you are comparing footprints, compare complete stations — including the accessories in the accessories collection you will actually keep on the counter.
FAQ on dimensions and portafilter size
What are the Meraki espresso machine dimensions?
The US product page, checked on 11 November 2026, lists 370 × 370 × 415 mm and 14.5 kg. The current Product Manual lists the same footprint and 14.3 kg. A product-image caption states 412 mm height. Copy the live page and the manual in your box, and plan clearance around the larger published height.
What portafilter size does Meraki use?
The official product page lists a 58 mm E61 portafilter. Existing 54 mm or 51 mm tools from another machine will not be a direct fit. Check 58 mm accessories against that standard.
How much cabinet clearance do I need?
Meraki does not publish a required overhead or side-clearance figure. Leave room to fill the hopper, swing a steam pitcher, pull the drip tray, and let heat dissipate. If your shelf sits close to 16 in, measure the hopper-lid motion before you buy.
Is the shipping box much larger than the machine?
Yes. The FAQ lists the package as 500 × 500 × 470 mm and 20 kg. Plan doorways and a landing surface around the carton, not only around the unpacked footprint.
If the worksheet fits your kitchen, confirm the live figures on the product page before you order, and keep the carton until you know the machine will stay.
